Rabu, 27 November 2013

Information About Mediabridge High Output Dual USB Car Charger For iPad and iPhone (Dual Port High Output Design: 1.0 Amp USB for iPhone; 2.4 Amp for iPad or additional iPhone)

Product Description

Mediabridge Dual USB Car Charger

Plug the charger into a car's 12-24V receptacle, to charge 2 Apple devices (iPhone, iPod, iPad) at once in full-power AC mode. It features a 1.0A USB port for an iPhone/iPod, & a 2.4A USB port for an iPad/other device. Play music, watch movies, make phone calls & more on the road while charging. It's built with an over-charge protection fuse, which switches to a 50mA trickle charge once a device's battery is full. This protects from harmful short circuits, overheating, over-currents & power spikes.

Product Features
- Charges 2 Apple devices at once at full-power in a car
- A 1.0A USB port for an iPhone/iPod, & a 2.4A USB port for an iPad/other device
- Compact, low-profile design fits securely into car outlets without blocking
- Stylish LED shows the charger's status
- Over-charge protection

Specifications
- DC input voltage: 12 VDC-24 VDC
- Output voltage: 4.75 VDC-5.25 VDC
- Output current: 0A-3.4A
- Operating temp: 0 ~40°C
- Vibration & shock: 1.0mm, 10-25Hz, 15 min per cycle for each axis (X,Y,Z), tested per MIL-STD-810D, method 514, procedure X

Compatibility
- The 2.4A port charges an iPad/2/3/Mini
- The 1.0A port charges an iPhone 5S/5C/5/4S/4/3GS, iPod Touch & iPod Nano
- Some Android devices, like Samsung Charge/Galaxy Tab/S3, Nexus, Droid Incredible & HTC Vivid need special cables to charge in AC mode, which Mediabridge sells separately

Installation
Plug into any 12-24V outlet (ex: car DC power socket). Using existing cables, connect an iPhone/iPod to the 1.0A port & an iPad to the 2.4A port

Notes
Connected devices will safely draw max power without damage

Dimensions
1"x1.25"x3" (protrudes 1.5" in use)

Warranty
Limited 1 Year Warranty

Support
Call us Tue-Sat 9AM-6PM Eastern, or email after hours for a reply in the next business day

Product Details

  • Amazon Sales Rank: #1710 in Cell Phone Accessories
  • Brand: Medialink
  • Model: PEC-USBX2-12V
  • Dimensions: 1.50" h x 1.50" w x 3.50" l, .9 pounds

Features

  • Charges your iPhone, iPod and iPad while on the road. Just plug the convenient car charger into a 12-24 Volt receptacle, to simultaneously charge 2 Apple devices in full-power AC mode (using your existing cables).
  • 2 High-output USB ports, including a 1.0 Amp USB port for charging your iPhone or iPod, and a 2.4 Amp USB port for charging your iPad or other device. Compact, low-profile design fits securely into most car outlets, and reduces the clutter associated with common bulky chargers.
  • Play music, stream YouTube, chat on the phone, surf the web and more during long travels while charging. A stylish LED indicates the charger's status.
  • Equipped with a fuse for over-charge protection, which switches to a trickle charge (50mA) once a connected device's battery is full. Safe from short circuits, overheating, over-currents and potentially harmful power spikes.
  • Dimensions: 1"x1.25"x3" (only protrudes 1.5" from outlet when in use). iPad, iPad2, iPad 3, iPad 4, new iPad charger, iPhone, iPhone 2, iPhone 3, iPhone 3G, 3GS, iPhone 4, iPhone 5 charger, iPod charger, cigarette lighter charger, 12V charger, iPod Touch charger.
Customer Reviews

Most helpful customer reviews

129 of 137 people found the following review helpful.
IMHO, I THOUGHT it was the best USB car charger, but turns out build is sub-par.
By VictorK
Although I would've liked this product a little more if the amperage for BOTH ports were 2.1, this product is the best car USB car charger out there in my opinion (as of 5/13/2012). High output, and two ports instead of perma-mounted cables, which gives you options for what kind of USB to use (mini, micro, etc). Although I don't own any devices that would require 2.1 amps (such as the iPad), the high amperage allows my phone to charge faster than even the one wall charger that the phone originally came with, WHICH, by the way, isn't the case ALL the time, but it is for me (Motorola Razr Maxx). No, I don't know what the max amperage my phone pulls, but the high amperage shaves about an hour (from four hours) off a full charge. It depends on the device and how much its allowed to pull from the charger. For those people who are worried whether or not the charger is too "powerful," it's probably not, if it's a USB device you're trying to use. While the VOLTAGE (which will always be 5V ±5%, hopefully) is sent by the charger to the device, the AMOUNT of power is PULLED by the device itself. Think of drinking water. You're going to drink as much as you NEED, regardless of how much water is available.

Edit (2/9/2013): So, after some use, this charger seems to have broken :-( I was pretty excited about this product in the beginning, as very few car chargers have such high amperage on top of multiple ports. However, it broke. With moderate use, it stopped functioning as it should in about 2 months. A bit late on the update, but I was reminded of this product by another review I was writing. So, my initial rave review is now down. I don't know if this is the case for all of these, or if I just received a lemon, but there you go with my experience with this product. All that stuff I said about how this stuff works is still correct, though, so I'd advise anyone looking for a charger keep that in mind.

68 of 71 people found the following review helpful.
Excellent, solid contruction, lots of power
By old mojo
This is a little bulky, and I knew this when I bought it. Altho it is a little smaller than I thought it would, which is good. I bought it to be used in my work vehicle where I need power.. plenty of it. I charge specialized meters for testing communications cables, use an iPad out in the field along with a Kindle Fire, iPhone, and other things that can be charged thru usb. This works flawlessly with everything i've thrown at it, and a couple of techs are looking into getting one for their work vehicle also. This charger almost always has something plugged into it to be charged up, if not two things at once, and this does not let me down. Easily 80% of the work day it is being used to charge at least one thing, if not two.
The packaging was very well done, simple enough instructions, and is a nice tight fit in the holder. Not sloppy at all and stays put. I also like how well they marked the two ports for 2.1 and 1.0. Very easy to see and read. The pictures that another reviewer posted are exactly the way mine arrived also. I was very impressed with the packaging.

Pros... you just read them :)

negatives: none

I plan on buying a couple more.. one for my personal vehicle, and one to keep with the laptop, and a couple of guys at work like it well enough to order one for themselves. I highly recommend this. You won't disappointed

153 of 167 people found the following review helpful.
Requires modification to charge Android devices in 1.0A AC mode
By Alan K. Fling
Based on the reviews and product description of this device, I was lead to believe that it would charge an Android phone at full AC power mode (not USB 0.5amp mode). Based on that information I ordered several of these for a medium-scale deployment of devices at my work.

Long story short: This device will not charge an Android device in AC power mode. As soon as you plug it in, the Android device enables USB charging mode.

I'm hoping that I can figure out a way to crack the unit open and short the middle pins (which forces AC charging mode for Android devices on other car chargers)...

I'm giving it two stars for excellent build quality and packaging.

Update: I figured out how to disassemble the unit and it turns out to be quite easy.

The high build quality of this unit actually enhances it's ability to be disassembled, modified and reassembled. You can do it all with a single flat-bladed screwdriver (and a soldering iron). Resassembly doesn't require any superglue like some of the other units that are popular to mod.

Once the unit was disassembled, I looked on the back of the circuit board and found 2 places where there were 4 small pins in a row. I put a small blob of solder across the middle pins on each of them and reassembled the whole unit.

I went out to the car to test it and sure enough, all my android devices see it as an AC charger and start charging in high-speed mode.

I will add one star to my rating due to the excellent build quality enabling an easy modification.

See all 903 customer reviews...

Tidak ada komentar:

Posting Komentar